基于深度神经网络的客机总体设计参数敏感性分析

飞机总体主要设计参数敏感性分析揭示了总体主要设计参数对飞机特性指标的影响,有助于总体设计方案的决策。针对宽体客机总体主要设计参数敏感性问题,根据其总体主要设计参数和特性指标的特点,以及多学科间的耦合关系,建立了深度神经网络模型。该深度神经网络模型以客机总体主要设计参数为输入,对特性指标进行预测。在深度神经网络模型中,设置了多个输入层、多个输出层以及多个分块的隐藏层,从而模拟客机总体主要设计参数对特性指标的影响以及不同特性指标之间的相互作用。测试结果表明,与传统代理模型相比,深度神经网络模型对客机特性指标的预测精度更高,多参数适应性更好。利用该深度神经网络模型对客机总体主要设计参数进行敏感性分析。分析结果表明,机翼1/4弦线后掠角在30°~31.5°时,有利于减少最大起飞重量和起飞平衡场长;发动机海平面最大静推力和机翼面积对客机直接使用成本、最大起飞重量等特性指标的影响最为显著。     

航天器自主导航状态估计方法研究综述

自主导航是航天器自主运行的核心关键技术。状态估计是实现航天器自主导航的核心手段,是指实时确定航天器在轨位置、速度和姿态等导航参数,是航天器自主导航技术的重点发展方向之一。首先,针对航天器自主导航的实际需求,阐述了研究航天器自主导航状态估计方法的必要性,具体从导航系统可观测性分析、导航滤波算法、导航系统误差补偿3个方面介绍了航天器自主导航状态估计方法的研究现状;然后,分析并总结状态估计方法在航天器自主导航系统中的实际应用;最后,结合理论研究和实际应用,给出了状态估计方法目前存在的主要问题并对其后续发展进行了展望。     

高超声速飞行器飞行动力学特性不确定分析

 高超声速飞行器分析模型存在较大不确定性,其给出的动力学特性与真实值之间存在偏差,因此研究飞行动力学特性分析结果的可信度水平对控制系统设计具有重要意义。针对典型的乘波体构型高超声速飞行器,在建立气动/结构/推进相互耦合的动力学模型基础上,利用非概率区间来描述模型中的不确定参数,并将复特征根不确定范围求解问题转化为频率和阻尼比两个实数的不确定区间分别求解,给出了动力学模态特征根、频率及阻尼比的不确定边界。分别采用直接蒙特卡罗(DMC)模拟方法、基于泰勒展开的区间分析方法(TIAM)和基于多项式逼近的区间分析方法(CIAM)对高超声速飞行器飞行动力学不确定性进行了研究。结果表明:CIAM计算时间适中,且给出的边界更为准确、安全,适合在控制系统设计和验证过程中使用。     

FGM板三维层合模型及热-噪声载荷下的动态响应研究

 为了有效地分析热-噪声联合载荷作用下的飞行器功能梯度壁板结构的非线性动态响应,提出了运用复合材料多层壳单元建立功能梯度材料(FGM)板的层合有限元建模新方法,研究了FGM板在热曲屈前、后状态下复杂的非线性时域动态响应特性,并探讨了梯度指数、热曲屈系数及声压级(SPL)等参数对FGM板非线性动态跳变响应的影响规律。FGM板三维层合建模新方法避免了采用常规有限元法(FEM)建模时需要在厚度方向划分大量单元的缺点;求解FGM板非线性动态响应时采用的隐式积分方案避免了模态叠加法对参与模态选择的经验性要求及模态截断造成的信息丢失等缺陷。仿真结果表明:FGM板层合有限元建模新方法合理可行、过程简便、计算精度高;研究发现:陶瓷-金属FGM板在热屈曲后的抗声振性能并不像热屈曲前那样介于金属板和陶瓷板之间,而是表现最差;热屈曲系数及声压级的组合形式是导致FGM板发生非线性跳变响应的主要影响因素。     

An adaptive turbo-shaft engine modeling method based on PS and MRR-LSSVR algorithms

In order to establish an adaptive turbo-shaft engine model with high accuracy, a new modeling method based on parameter selection (PS) algorithm and multi-input multi-output recursive reduced least square support vector regression (MRR-LSSVR) machine is proposed. Firstly, the PS algorithm is designed to choose the most reasonable inputs of the adaptive module. During this process, a wrapper criterion based on least square support vector regression (LSSVR) machine is adopted, which can not only reduce computational complexity but also enhance generalization performance. Secondly, with the input variables determined by the PS algorithm, a mapping model of engine parameter estimation is trained off-line using MRR-LSSVR, which has a satisfying accuracy within 5&. Finally, based on a numerical simulation platform of an integrated helicopter/ turbo-shaft engine system, an adaptive turbo-shaft engine model is developed and tested in a certain flight envelope. Under the condition of single or multiple engine components being degraded, many simulation experiments are carried out, and the simulation results show the effectiveness and validity of the proposed adaptive modeling method.     

Performability analysis of avionics system with multilayer HM/FM using stochastic Petri nets

The integrated modular avionics (IMA) architecture is an open standard in avionics industry, in which the number of functionalities implemented by software is greater than ever before. In the IMA architecture, the reliability of the avionics system is highly affected by the software applications. In order to enhance the fault tolerance feature with regard to software application failures, many industrial standards propose a layered health monitoring/fault management (HM/FM) scheme to periodically check the health status of software application processes and recover the malfunctioning software process whenever an error is located. In this paper, we make an analytical study of the HM/FM system for avionics application software. We use the stochastic Petri nets (SPN) to build a formal model of each component and present a method to combine the components together to form a complete system model with respect to three interlayer query strategies. We further investigate the effectiveness of these strategies in an illustrative system.     

A method of multi-objective reliability tolerance design for electronic circuits

Tolerance design plays an important role in reliability design for electronic circuits. The traditional method only focuses on the consistency of output response. It is not able to meet the needs of increasing development of electronic products. This paper researches the state of related fields and proposes a method of multi-objective reliability tolerance design. The characteristics of output response and operating stresses on critical components are both defined as design objectives. Critical components and their operating stresses are determined by failure mode and effect analysis (FMEA) and fault tree analysis (FTA). Sensitivity analysis is carried out to determine sensitive parameters that affect the design objectives significantly. Monte Carlo and worst-case analysis are utilized to explore the tolerance levels of sensitive parameters. Design of experiment and regression analysis are applied in this method. The optimal tolerance levels are selected in accord with a quality-cost model to improve consistency of output response and reduce failure rates of critical components synchronously. The application in light-emitting diode (LED) drivers indicates details and potential. It shows that the proposed method provides a more effective way to improve performance and reliability of electronic circuits.     

高压比离心叶轮自循环机匣处理扩稳研究

为了探索自循环机匣处理扩稳机理,利用全三维数值模拟方法对应用自循环上游槽封闭机匣和自循环机匣处理结构两种情况下的Krain高压比离心叶轮进行了详细研究.对比结果表明:自循环机匣处理能有效的延迟失速的发生并在近失速区域略微提高压气机的效率以及总压比.通过详细的流场分析表明:该机匣处理能有效地减小叶顶栽荷,从而降低泄漏流相对速度,抑制间隙泄漏涡在叶顶通道内的发展以减小低速气流在流道内的阻塞,提高转子通道的通流能力,从而达到扩大稳定工作范围的目的.     

液体火箭发动机中频耦合振荡初步研究

为了研究常规液体火箭发动机研制中出现的中频流量型耦合振荡问题,对发动机耦合系统中各环节建立了满足声学分析的线性化频域模型.通过比较供应系统和燃烧室的幅频响应,并分析耦合系统的自由振荡复频率,以判断发动机的耦合稳定性.计算结果符合发动机试车规律,能够有效地反映该类型不稳定的特征.进一步讨论了燃烧时滞、喷注压降、管路长度和安装节流圈对系统耦合不稳定的影响规律,并揭示了该类型不稳定的机理.     

某型飞机刹车失效分析及对策研究

刹车系统是飞机的重要组成部分,是保证飞机滑跑、起飞和着陆的重要装置,其工作可靠性直接影响飞行安全.本文对某型飞机因刹车失效,发生一起与地面停放飞机相擦的飞行事故征候,进行了刹车失效分析和机理研究.同时,按技术问题“五归零”要求,深入开展了多余物产生根源的排查工作,进行了改进研究和试验验证,并制定了对策.